How to Use a Fisher and Paykel Dishwasher

How to Use a Fisher and Paykel Dishwasher

logo

Fisher Paykel Dishdrawer Double Dishdrawer

product

DISHDRAWER  DISHWASHER

Keep this document handy for easy reference.

  • For detailed information on the features of your dishwasher, see your 'User guide'.
  • Before using your dishwasher, make sure you read the full 'User guide', with special attention to the 'Safety and warnings' section.
  • For contact information or if you require service, assistance or replacement parts, see the end of this document or your 'Service & warranty' booklet.

OPERATING INSTRUCTIONS – STARTING A WASH

Discard scraps
Scrape large food particles off (e.g. bones, fruit stones) and remove any foreign objects (e.g. toothpicks, strings, paper

image 1 Load dishes carefully
To help with wash performance, arrange dishes so they are evenly spaced and not nesting.

IMPORTANT!
Accommodates plates up to a max height of 280mm (11") for standard tubs or 310mm (12 1/4") for tall tubs

image 2 Check spray arm(s) are mounted correctly and can rotate fully around
Check the spray arm is mounted correctly by physically rotating it around with your hand. Before a wash, ensure there are no items blocking the spray arm(s) from rotating

image 3 Add detergent
Fill the detergent dispenser (A) with powdered detergent and close the dispenser door.

IMPORTANT!
Do not place liquid detergent or tablets in the detergent dispenser.

If using a tablet or gel pouch, place it in the cutlery basket (B) or at the edge of the base rack (see user guide for details).

Check rinse aid
If the indicator on its plug (C) glows bright red, refill the rinse aid dispenser (D) with liquid rinse aid. Make sure you then refit the rinse aid plug back into its original position, by rotating the plug back into an upright position

image 4

Select wash
Press to select a wash >> program.

image 5

Start wash or set Delay start
To start wash: Close the drawer and press OR Press on the control panel before closing the door To set delay start: Press and hold to set the delay start time, then close the drawer. Note: Each tone indicates a 1h delay.

image 6

CONTROLS AND INDICATORS

Indicators Description

Off/On
Opening the drawer will automatically turn the dishwasher on. If the dishwasher is in an idle state, touch any button to reactivate it.

  1. Wash program indicators
    If lit: The wash program has been selected.
  2. Lock indicator
    If lit: Keylock or child lock is activated.
  3. Wash modifier indicators
    If lit: The wash modifier has been selected. The wash program length and temperature will be modified accordingly.
  4. Delay start indicator
    If lit: Delay start is set. The wash program will start after the selected time delay (1-12h
Controls Description

WASH PROGRAM SELECTOR

Press >> to scroll through the wash program options. See opposite table for program descriptions.

WASH PROGRAM DESCRIPTION
Heavy Heavily soiled pots, pans and dishes.
Medium                                            Dishes that are quite heavily soiled or food soils that have been left to dry overnight.
Eco (default setting)                          Normally soiled dishes for optimum water and energy usage. The US/Canada Energy Guide is based on this program.
Fast                                                Lightly soiled dishes.
Delicate                                           Lightly soiled and heat sensitive crockery.
Rinse                                             Prevents odours and soils from drying on dishes.

WASH MODIFIER SELECTOR: Press to scroll through the wash modifier options .Note: Not all modifiers are available for all wash programs.

Keylock
Disables all the buttons (helpful when cleaning the dishwasher).
To activate:
Press and hold until you hear a tone. The lock indicator will light up.
Childlock
Disables all the buttons and locks the drawer closed (preventing unauthorised use by children).
To activate:
Press and hold until you hear two tones. The lock indicator will light up. To cancel keylock/childlock: If the drawer is open Press and hold until you hear a tone. The lock indicator will go out. If the drawer is closed Press and hold until you hear a tone. The lock indicator will go out

START SELECTOR (either on door or inner control panel)

  • To start wash: Close the drawer and press>> OR Press on the control panel before closing the door To Pause: Press
  • Wait for three short and one long tone before opening the drawer. Forcing it open mid cycle may cause damage or injury.
  • If the drawer is not restarted within seven minutes it will sound intermittently until it is restarted.

Delay start

  • Press and hold to set the delay start time. Each tone indicates a 1h delay (up to 12h). The delay start indicator will light up.
  • If you scroll past 12h the dishwasher will exit delay start. To re-enter delay start follow step 1 above.
  • The wash will start when the delay time is over, provided the drawer is closed.
    DD24 models only US/CA
    If drawer is not closed within 4 seconds of setting delay start, OR If the drawer is opened after delay start has been set (for example, to load more dishes), delay start will be suspended.

To resume:
Press and close the drawer OR close the drawer and press . Cancel wash/delay start Press and hold or .

  • If there is any water in the drawer, it will automatically drain before the dishwasher turns off.

DOS AND DON'TS OF LOADING

image 7

image 8

How to change the setting of an option
  1. CHECK
    Check that there is no wash underway, then open the drawer.
  2. ENTER MENU
    To enter the menu: Press and hold the and together for four seconds.
    • You are now in the Rinse aid option of the preference options menu.
    • To change the Rinse aid setting, go to step 4 now.
  3. SCROLL TO OPTION
    Press to scroll to the next option. The wash modifier indicators will display which option is selected (see table below).  When you have scrolled to the end of the sequence, the menu will start again with Rinse aid.
  4. CHANGE SETTING
    Press to change the setting within an option. The wash program indicators will display which setting is selected (see table below).
  5. SAVE SETTING & QUIT MENU
    Press to save the new setting and quit the preference options menu.

Double models only:
You can use either drawer to change the settings. Changing the settings in one tub will set your preferences for the whole dishwasher

FOR MORE INFORMATION

For detailed information on the features of your dishwasher see your 'User guide
For warranty information see your 'Service and warranty' booklet

IF YOU have any questions or comments
● need a Fisher & Paykel authorized technician to service your product
● need replacement parts or accessories
● want to register your product see your 'Service and warranty' booklet or contact us via our website :www.fisherpaykel.com

logo

Documents / Resources

Fisher Paykel Dishdrawer Double Dishdrawer [pdf] Instruction Manual
Dishdrawer Double Dishdrawer, DD60SDFX9, DD60SDFTX9, DD60SDFHX9, DD24SDFTX9, DD60DDFX9, DD60SDFX9, DD60SDFTX9, DD60DDFHX9, DD60SDFHX9, DD24DDFTX9, DD24SDFTX9

References

  • www.fisherpaykel.com Home Appliances | Fisher & Paykel USA

Source: https://manuals.plus/fisher-paykel/dishdrawer-double-dishdrawer-manual

Posted by: kochriont1974.blogspot.com

0 Response to "How to Use a Fisher and Paykel Dishwasher"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel